User Manual

SIGLENT
SSG5000X User Manual 145
b. Set the carrier amplitude.
c. Turn the RF output on.
Compensation Channel
Set the compensation channel as RF or Output.
⚫ RF：Compensate RF channel of the front panel.
⚫ Output：Compensate the I/Q signal output from the rear panel connectors.
I/Q Adjustment
Use the I/Q Adjustments to compensate for or add impairments to the I/Q
signal.
This adjustment is only used for RF output.
1) Gain Balance.
Adjust the I signal amplitude relative to the Q signal amplitude. And use it as an
internal channel image optimization.
2) I Offset
Adjust the DC bias level of I+ and I- baseband signals. Unit: %. Range: 50%.
3) Q Offset
Adjust the DC bias level of Q+ and Q- baseband signals. Unit: %. Range: 50%.