User Manual

SIGLENT
SSG5000X User Manual 3
1.2 Preparing for Use
Adjust the Supporting Legs
For benchtop operation, you may want to use the supporting legs. Adjust the
supporting feet appropriately to tilt the RF signal source upwards.
Figure 1-4 before adjusting Figure 1-5 after adjusting
Connect to AC Power Supply
The RF signal source accepts 100-240V, 50/60/440Hz AC power supply. Please use
the power cord provided to connect the instrument to the power source as shown
in the figure below.
Figure 1-6 Power Interface
Power
Interface