User Manual

SIGLENT
SSG5000X User Manual 158
Chapter 3 Application Examples
3.1 Output RF signal
Output a RF signal with a frequency of 3GHz and amplitude of 0dBm from the [RF
OUTPUT 50Ω] connector.
1. Restore factory settings
a) Press UTILITY or the touch screen to set UTILITY -> Setting -> Preset Type->
Default.
b) Press PRESET, or press UTILITY -> Preset.
2. Set the Frequency
Press FREQ, and enter the 3GHz with the numeric keypad, or click the frequency on
the touch screen to pop up the keypad to input 3GHz.
3. Set the Level
Press LEVEL, and enter the 0dBm with the numeric keypad, or click the amplitude
on the touch screen to pop up the keypad to input 0dBm on the keypad.