User Manual

SIGLENT
SSG5000X User Manual 163
1. Restore factory settings
a) Press UTILITY or touch Preset Type-> Default.
b) Press PRESET or reset the system settings to perform the reset operation.
2. Install the pulse train option
a) Activate the pulse train generator option.
3. Edit pulse list
a) Press MOD or select ANALOG MOD from the Home page. You can swipe left or
right or press MOD repeatedly to reach the Pulse Mode screen. Set Pulse Mode
to Train, and the Pulse Train menu will appear.
b) Click in Pulse Train menu to enter settings, set the positive width of first
pulse to 10ms, the negative width to 30ms, and the count to 1.
c) Click the “+” on the left to add one line, set the positive pulse width to 20ms,
the negative pulse width to 20ms, and the count to 2.
d) After clicking, you can click on the left side to see the schematic diagram of
the pulse train as follows.