User Manual

SIGLENT
SSG5000X User Manual 164
4. Set the Pulse State to on.
5. Enable the RF modulation output
a) Press MOD ON/OFF and then press RF ON/OFF. The backlights of MOD ON/OFF
and RF ON/OFF will be illuminated. RF and MOD labels in the status bar will
change from gray to blue.
At this time, the signal on the [RF OUTPUT 50Ω] connector will match the settings as
configured above.
3.5 Output IQ modulated signal in Custom
Mode
The following steps describe how to generate an IQ modulated signal with a
modulation mode of 32QAM. Users can modify and configure IQ modulation