User Manual

SIGLENT
SSG5000X User Manual 166
keypad.
4. Enable the RF modulation output
b) Press MOD ON/OFF and then press RF ON/OFF. The backlights of MOD ON/OFF
and RF ON/OFF will be illuminated. RF and MOD labels in the status bar will
change from gray to blue.
At this time, the [RF OUTPUT 50Ω] connector of the SSG outputs an IQ modulation
signal with a modulation mode of 32QAM, and the IQ modulation signal is
connected to an IQ demodulation device to observe the demodulation
characteristics of the IQ modulation signal: