User Manual

SIGLENT
SSG5000X User Manual 172
a) Press FREQ and enter 2GHz with the numeric keypad, or click the frequency
input box on the touch screen to pop up the keypad to input 2GHz on the
keypad.
3. Set the real-time AWGN function
a) Press I/Q-> ARB-> ARB Setup-> Real Time AWGN to enter real-time AWGN setting
interface;
b) Set the Output Mux to "Carrier + Noise", the Carrier Bandwidth to 3.84 MHz, the Flat
Noise Bandwidth to 8 MHz, the Carrier to Noise Ratio Format to "C/N", the Carrier to
Noise Ratio to 34 dB, the Power Control Mode to "Total ", and the Total Power to
-10dBm;
c) Turn on the Real Time AWGN state;
4. Play Waveform
a) Press I/Q-> ARB-> Select Waveform, and select “WCDMA_3 DPCH” to play;
b) Turn on ARB State.
5. Enable the RF modulation output
a) Press MOD ON/OFF and then press RF ON/OFF. The backlights of MOD ON/OFF
and RF ON/OFF will be illuminated. RF and MOD labels in the status bar will
change from gray to blue.