User Manual

SIGLENT
SSG5000X User Manual 175
1. For standard installations, you can use NI-VISA on your PC for the VXI driver. If
you wish to control the instrument without NI-VISA, use sockets or telnet.
2. Connect the SSG USB Device port to a PC with a USB A-B cable.
3. Switch on the SSG
Figure 4-1 USB Device
The SSG will be detected automatically as a new USB hardware.
Connecting via the LAN port
Refer to the following steps to finish the connection via LAN:
1. Install NI-VISA on your PC for VXI driver. Or without NI-VISA, using socket or
telnet in your PC’s Operating System.
2. Connect the SSG to PC or the local area network with a LAN cable
3. Switch on the SSG
Figure 4-2 LAN