User Manual

SIGLENT
SSG5000X User Manual 182
4.3 Remote Control Capabilities
User-defined Programming
Users can use SCPI commands to program and control the signal generator. For
details, refer to the introductions in “Programming Guide”.
Send SCPI Commands via NI MAX
Users can control the signal generator remotely by sending SCPI commands via
NI-MAX software. NI_MAX is National Instruments Measurement and Automation
Explorer. It is an executable program that enables easy communication to
troubleshoot issues with instrumentation.
Using USB
Run NI MAX software.
1. Click “Device and interface” at the upper left corner of the software;
2. Find the “USBTMC” device symbol
3. Click “Open VISA Test Panel” option button, then the following interface will
appear.