User Manual

SIGLENT
SSG5000X User Manual 11
Telnet, and uses WEB for remote control. It can quickly build test systems with other
standard equipment.
3. USB host
The RF signal source can be used as the "main device" to connect to the external
USB device. The interface reads the trace or state file from the U disk, or stores the
current instrument state or trace to the U disk, and can also save the content
displayed on the current screen in .BMP format to the U disk.
4. USB Device interface
The interface can be connected to a compatible computer and controlled by
software on the host computer
5. EXT MOD INPUT
Input BNC connection for an external modulation.
6. 10MHz IN
The [10MHz IN] and [10MHz OUT] connectors are commonly used to establish
synchronization between multiple instruments. The RF source can use an internal
reference source or an external reference source.