User Manual

SIGLENT
SSG5000X User Manual 17
⚫ SWEEP: The status of the sweep state.
⚫ AWGN: The status of the Additive White Gaussian Noise (AWGN) to a carrier
when IQ Modulation.
⚫ UF: Amplitude flatness function enabled.
⚫ OFFSET: Amplitude offset enable.
⚫ : The identification is displayed when a USB disk is inserted
⚫ LAN: LAN state. Indicates that LAN is successfully connected. indicates
that there is no network connection or network connection failed
2. RF frequency
RF output frequency setting. When the scan type is "frequency" or "frequency &
amplitude", the frequency scanning progress bar is displayed.
3. RF level
RF output level setting. When the scan type is "amplitude" or "frequency
&amplitude", the level scanning progress bar is displayed.
4. Touch screen display area: Display the settings under each menu
⚫ LF: LF output state and LF waveform displayed. Sine, Square, Sawtooth,
Triangle and DC can be set up.
⚫ ANALOG MOD: Modulation state. Amplitude modulation, frequency