User Manual

SIGLENT
SSG5000X User Manual 20
1.7 Parameter setting
Parameter input can be performed through touch screen, keypad and digital keys,
knob or direction keys. This section introduces an example of three parameter
setting methods by setting the center frequency to 100 MHz.
1. Using the digital keyboard
1) Press FREQ;
2) Use the numeric key to input the value "100";
3) Then press to select unit MHz;
2. Using the touch screen
1) Click the Freq input box on the screen to display the keypad.
2) Enter 100 on the keypad, then select unit MHz on the keypad.
3. Using the knob and the direction key
1) Bring the Focus Cursor on the Freq input box by using the knob.
2) Press the knob and adjust the left and right arrow keys to select the digit you
wish to adjust.
3) Then turn the knob or press the up and down arrow keys to change the
parameters until the desired value is obtained.