User Manual

SIGLENT
SSG5000X User Manual 23
2.1 Frequency Setting
The value of the RF frequency is displayed in the header of the display (“Freq”).
This field provides the direct input of the RF frequency. Alternatively, you can enter
the RF frequency in the “Freq” dialog.
Note that the displayed RF frequency in the header and the RF output frequency,
entered in the “FREQ” dialog can be different, as explained in the following
section.
If you working with a downstream instrument, e.g. a mixer, you can enter related
parameter value in the frequency settings dialog (“Offset”).
The correlation between the RF frequency, the RF output frequency and the
frequency offset is as follows:
“FREQ” (in header) = “RF output frequency” (frequency in dialog) + “Freq
offset” (offset in dialog)
RF output Frequency
Setting the RF output frequency
1. Keypad operation