User Manual

SIGLENT
SSG5000X User Manual 24
Press FREQ->Frequency to make the focus fall on this parameter item.
⚫ Use the numeric keypad to input the desired value and press the unit button to
select the desired unit. Optional units are GHz, MHz, kHz, and Hz. Press ENTER
to select the current unit.
⚫ Press ENTER or press the knob to enter the parameter editing state, and then
use the left and right direction keys to move the cursor to the desired position.
Press the up and down direction keys, rotate the knob or press the numeric
keypad to modify the value. Press ENTER, knob or ESC to exit the editing mode.
2. Touch screen operation
Click on SHORTCUT->FREQ->Frequency to enter the interface of RF output frequency
setting.
⚫ Click the frequency parameter, then pop up the keypad interface, then click the
number symbol in the keypad to change the value. Click the unit to modify the
unit. Click the tick to confirm the modified value and selected unit.
⚫ Long press edit box to enter the edit mode. Press the up and down direction
keys, rotate the knob or press the numeric keypad to modify the value, and
press the ENTER key, knob or ESC key to exit the edit mode.
Note: The maximum RF output frequency is 6 GHz, and 9 kHz is the minimum.
Freq Offset
This setting the displayed frequency offset from the RF output signal.