User Manual

SIGLENT
SSG5000X User Manual 26
⚫ Long press the edit box to enter the edit mode. Press the up and down
direction keys, rotate the knob or press the numeric keypad to modify the value,
and press the ENTER key, knob or ESC key to exit the edit mode.
Note:
⚫ The relationship between the RF output frequency, the display frequency and
frequency offset is:
Display frequency = RF output Frequency + Frequency offset
⚫ The difference value between the display frequency and the frequency offset is
the actual RF output frequency, which must not exceed the instrument
frequency output range.
Phase Offset
Setting the phase offset from the RF signal
Application: When multiple RF sources are outputting RF signals at the same time,
multiple signals can be output to the same phase or a fixed phase offset by
adjusting this parameter.
Also you should set the devices the same frequency and synchronous them.
1. Keypad operation
Press FREQ-> Phase Offset to make the focus fall on this parameter item.
⚫ Use the numeric keypad to input the desired value and press the unit button to