User Manual

SIGLENT
SSG5000X User Manual 29
Level (in header) = RF output level (level in the Level menu) + Level offset (Offset in
Level menu)
Level setting
Setting the RF signal level
1. Keypad operation:
Press the LEVEL->Level to make the focus fall on this parameter item
⚫ Use the numeric keypad to input the desired value and press the unit button to
select the desired unit. Optional units are dBm, dBuV, uV, mV, V, nW, uW, mW
and W. Press ENTER to select the current unit by default.
⚫ Press ENTER or press the knob to enter the parameter editing state, and then
use the left and right direction keys to move the cursor to the desired position.
Press the up and down direction keys, rotate the knob or press the numeric
keypad to modify the value. Press ENTER, knob or ESC to exit the editing mode.
2. Touch screen operation
Click on SHORTCUT ->LEVEL->Level to enter the interface of RF output level setting.
⚫ Click the level parameter, then pop up the keypad interface, then click the
number symbol in the keypad to change the value. Click the unit to modify the
unit. Click the check mark to confirm the modified value and selected unit.