User Manual

SIGLENT
SSG5000X User Manual 30
⚫ Long press edit box to enter the edit mode. Press the up and down direction
keys, rotate the knob or press the numeric keypad to modify the value, and
press the ENTER key, knob or ESC key to exit the edit mode.
Level Offset
Setting the level offset from the RF signal’s level
Application: When connecting a fixed attenuation or gain, the level value after
attenuation or amplification can be directly read and set on the RF source by
setting a level offset.
When level offset is not zero, the status bar will display OFFSET in blue.
1. Keypad operation
Press LEVEL-> Level Offset to make the focus fall on this parameter item.
⚫ Use the numeric keypad to input the desired value. Press ENTER or click the
check mark to confirm.
⚫ Press ENTER or press the knob to enter the parameter editing state, and then
use the left and right direction keys to move the cursor to the desired position.
Press the up and down direction keys, rotate the knob or press the numeric
keypad to modify the value. Press ENTER, knob or ESC to exit the editing mode.