User Manual

SIGLENT
SSG5000X User Manual 40
4) Cleaning list: Click to clean and preset current list.
5) Default step sweep list: Click to generate a new list according to the step
sweep setting.
6) Loading list: Click button to enter the file system directory. At this time,
the sweep list file previously saved in the device can be selected to read, and
the parameter can be modified.
7) Save list: Click the button to enter the file system directory. At this time,
enter the file name, then save the sweep list file.
Note: Please refer to the related introduction in “File Management” for detailed
operation of Loading/Saving files.
Each line parameter represents the setting of each sweep point:
1) Number: Indicates the row number of the sweep point.
2) Frequency: Indicates the frequency of the sweep point.
3) Level: Indicates the level of the sweep point.
4) Time: Indicates the dwell time of the sweep point.
Direction
Sweep direction state is “up” by default. The SSG5000X provides two types: “up”
or “down”. Click the drop-down box to enable the corresponding sweep