User Manual

SIGLENT
SSG5000X User Manual 42
⚫ Auto: The default mode. If the sweep mode is “continuous”, just select one
sweep type to start a sweep. If the sweep mode is “single”, then click the
Execute single sweep button to start a one-time sweep.
⚫ Key: If the sweep mode is “continuous”, the device will start a one-time
sweep after you press the Trigger button on the front panel or click Click to
trigger button on the touch screen. If the sweep mode is “single”, first click
the Execute single sweep button, then a one-time sweep will be started after
you press the Trigger button on the front panel or click Click to trigger button
on the touch screen.
⚫ Bus: If the sweep mode is “continuous”, the device will start a one-time
sweep after receiving a “*TRG” command over the communications bus (USB
or LAN) from a controlling computer. If the sweep mode is “single”, click the
Execute single sweep button first, then send a “*TRG” command to start a
one-time sweep.
⚫ External: The device receives the trigger signal input from the [TRIGGER IN]
connector on the back panel. If the sweep mode is “continuous”, the device
will start a one-time sweep after receiving a specified polarity TTL pulse. If the
sweep mode is “single”, click the Execute single sweep button firstly and