User Manual

SIGLENT
SSG5000X User Manual 45
When performing a sweep operation, the order of priority that satisfies the required
conditions from high to low is: Single sweep -> trigger mode -> point trigger mode.
For example, when the “trigger mode “ and “point trigger mode” are both
selected as “key”: In the “continuous sweep”, first press the Trigger key to
satisfy the trigger mode, and then press the Trigger key again to meet the point
trigger sweep mode to begin sweep. In the “single sweep”, you need to press
Execute single sweep first to meet the single sweep conditions, and then press the
Trigger key two times to meet the sweep cycle trigger and point trigger conditions
to begin sweep.