User Manual

SIGLENT
SSG5000X User Manual 48
external modulation source level to the modulation depth is 50%/V.
3. Int + Ext
Use both the internal and externally applied modulation signals, this technique can
be used to source dual tone AM.
AM Shape
The SSG5000X supports modulation waveforms for internal “sine” and “square”
modulation sources. Select MOD->AM-> AM Shape, after setting to “Int” or
“Int+Ext”, you can select AM waveform as “Sine” or “Square”.
AM Rate
Select MOD->AM-> AM Rate, and set the AM rate.
1. Sine wave modulation frequency range is 0.01Hz~100kHz
2. Square wave modulation frequency range is 0.01Hz~20kHz
AM Depth
Set the modulation depth in percent. Select MOD->AM->AM Depth, and then set AM
depth.
When the “Int” modulation source is selected, the AM modulation depth is set