User Manual

SIGLENT
SSG5000X User Manual 61
Note: This setting item will be hidden when the modulation source is “Ext” or the
pulse mode is “Train”.
#2 Pulse Width
#2 Pulse Width represents the width of the second pulse of the double pulse
modulated signal. This parameter can be set by touching screen keyboard or
pressing the front panel keypad.
Note: This setting item will be hidden when the modulation source is “Ext” or the
pulse mode is “Train”.
Trigger Out
The default is “off”, Click the slide switch to switch the trigger output switch
status.
⚫ On: Turn on the trigger output function. At this time, the signal source outputs
the trigger signal generated by the internal pulse generator from the [TRIG IN/OUT]
connector on the rear panel.
⚫ Off: Turn off the trigger output function.
Note: When the trigger mode is “Ext Trig” or “Ext Gate”, the trigger output
function will be automatically turned off. And only the trigger signal of the PULSE