User Manual

SIGLENT
SSG5000X User Manual 68
the button to zoom out the center position of the current waveform; The
“Zoom Position” parameter control displays the center position of the current
waveform, and the operations of the “Zoom In” and “Zoom Out” buttons are
based on this position. It can be set by touching screen keyboard or pressing the
front panel keypad to shift the current waveform to the corresponding position.
The scaling operation for the drawing area can be achieved in the following ways:
⚫ Zoom in, zoom out, restore and pan through the Control Area’s , ,
button, and Zoom Position parameter controls.
⚫ From the web interface, you can press the left mouse button, select the area to
be enlarged, and then release the left button to complete the zoom operation. You
can also use the finger or touch directly to zoom in on the touch screen; click the
right mouse button to undo the previous step.
⚫ From the web interface, you can use the mouse wheel, roll down to zoom in
and roll up to zoom out. The zoom position of the wheel is the same as the zoom
position of the control area.