User Manual

SIGLENT
SSG5000X User Manual 69
2.5 LF Setting
LF Source
The SSG5000X has an internal low-frequency signal generator that can be used as
an internal source for low-frequency signal output or analog modulation. When
output as a low-frequency signal, the LF output supports several common
waveforms, and the frequency and amplitude of the low-frequency signal can be
set. Press LF to enter the LF parameter settings. Setting description is as follows:
LF State
Select LF-> LF Source ->LF State to turn LF on or off.
LF Frequency
Select the LF-> LF Source ->LF Frequency to set the frequency of the LF output
signal, the setting range is 0.01Hz ~ 1MHz.
LF Level
Select the LF-> LF Source ->LF Level to set the LF output amplitude, the range is
from 1mV ~ 3V, and supports a number of unit types.