User Manual

SIGLENT
SSG5000X User Manual 70
LF Offset
Select LF-> LF Source->LF Offset to set the amplitude offset of the LF output. The
setting range is.
1
2.5
2
LFoffset LEVEL−
LF Shape
Select LF-> LF Source->LF Shape, you can select the LF output signal waveform.
Current waveform types are “sine wave”, “square wave”, “Sawtooth wave”,
“triangle wave”, and “DC”. The default LF output signal is the “sine wave”
waveform.
LF Phase
Select the LF-> LF Source ->LF Phase you can set the LF phase, the setting range is
-360° ~ 360°, and supports degrees or radian units.
LF Sweep
Sweep State
Select LF->LF Sweep->Sweep State to activate the LF frequency sweep signal