User Manual

SIGLENT
SSG5000X User Manual 76
Press UTILITY->Settings->Factory Reset, set the instrument parameters and status
to factory defaults.
To restore factory settings, in addition to loading the default settings, the following
functions and parameters will also be configured.
Table 2-2 Factory default
Parameter
Default
Setting
Language
Chinese/English(depend on factory
config)
Preset Type
Default
Beeper
On
Screen Saver
Off
Power On
Default
Power On Line
Off
10M Adjustment
Off
Interface
DHCP State
Off
IP Address
10.11.13.220
Subnet Mask
255.255.255.0
Gateway
10.11.13.1