User Manual
SIGLENT
SSG5000X User Manual 78
Set the instrument power on sequence. In some situations, you may want the
instrument to automatically restart if the line power is restored.
⚫ Off: If line power is available, you need to manually press the power key on the
front panel to start the instrument.
⚫ On: If line power is available, the instrument starts automatically. This is an
idea feature for automatic or remote tests that may be difficult to physically
reach.
Press UTILITY->Setting ->Power on Line to switch the state
9. 10M Adjustment
Modifying the Reference Oscillator Code will change the reference frequency. You
can externally connect a frequency counter from the 10MHz OUT connector on the
rear panel and adjust the 10MHz reference by modifying the code.
⚫ Press to save “*.dac” file to store the Ref Oscillator Code you currently
set.
⚫ Press to recall the Ref Oscillator Code you have stored.
⚫ Press to set the Ref Oscillator Code to default value, and
the reference frequency will reset to the original value, too.
Press UTILITY->Setting ->10M Adjustment to switch the state.