User Manual

SIGLENT
SSG5000X User Manual 81
4) Gateway
Configure the network subnet mask.
Press UTILITY->Interface ->Gateway, then move the cursor to specified location and
press number keys to input value, finally press ENTER to make the setup effective.
2. Web Setting
Set the web login password.
Press UTILITY->Interface ->Web Password Setting, to enter the current password.
After correctly entering the password, a new password can be set in New Password.
Then make the setup effective by entering the new password again in Confirm
Password. If the password needs to be reset to default, just click the Reset to default
button. (The default pass word is “siglent”.)
3. GPIB Setting
Set the GPIB address from 1 to 30. SSG5000X must use the SIGLENT USB-GPIB
interface (optional) connected to the USB Host port located on the rear panel.
Press UTILITY->Interface ->GPIB Address, and then press number keys to input value,
finally press ENTER to make the setup effective.