User Manual

SIGLENT
SSG5000X User Manual 82
Self Test
1. LCD Test
Press UTILITY ->Self Test ->LCD Test to enter the screen detection.
SSG5000X cycles through the red, green and blue pixels of the display to verify
whether there are dot defects on the screen.
Press 7 to change the color and press 8 to exit.
2. Key Test
Press UTILITY->Self Test ->Key Test to enter the keyboard test interface. Press the
function keys at the front panel one by one and observe whether the
corresponding key is checked. If not, an error may have occurred in that key. To exit
the test, press 8 three times or click the screen.
3. LED Test
Press UTILITY-> Self Test ->LED Test to enter the LED test interface. Press 7 to light
or extinguish the key light of the button MOD ON/OFF and RF ON/OFF and press 8
to exit the test.
4. Board Test
Press UTILITY-> Self Test ->Board Test to enter the board test interface. Test whether
writing and reading are normal for CPLD and FPGA.