Quick Start Guide

Firmware
Operation
SSG5000X Signal Generator 14
Check System Information
Pres Utility -> System Info to view the instrument's system information,
including:
Firmware Upgrade
Follow this procedure to update the instrument firmware:
Startup Times
Model
Software Version
Hardware Version
Host ID
Serial Number
Load Option
1. Press Utility -> Option , to enter option interface. Click the drop-down
box under the “Install” to choose the license type need to be installed. Enter a
license in the input box and click Install to finish the license installing.
2. If the installations succeed, the prompt message “license was successfully
installed” will be pop-up. If not, the prompt message “license was entered
incorrectly” will be pop-up.
1. Download the firmware package from an official SIGLENT website.
www.siglentamerica.com
http://www.siglent.com/ens
https://www.siglenteu.com
2. Extract and copy the .ADS file into the root directory of a USB stick.
3. Press Utility -> Update , and select the update file.
4. Click Recall to update the system software.
The progress bar will appear on the screen while updating. The instrument
will restart automatically if updates succeed or display a pop-up prompt box if
updates fail.
Note: The SSG comes with trial options that have a finite number of uses.
This is to allow users to evaluate the available options without purchasing
them. You can find the remaining number of trials at top of the option
interface. When the remaining time of a certain function is zero, the function
will be disabled. When a license is successfully installed for a certain function,
the remaining times will be shown as “--” and the type of the license is
permanent, which means users have unrestricted access to the function.