Quick Start Guide

The Front
Panel
SSG5000X Signal Generator 4
Front panel function button
Table 1 2 Function keys description
Control Keys Description
FREQ Set frequency, frequency offset, phase offset and other related parameters
LEVEL Set level, level offset, ALC state, flatness and other parameters, power sensor display and control functions
SWEEP Set sweep state, step sweep, list sweep, direction and other related parameters
LF Set LF state, LF level, LF frequency and other related parameters
MOD Set various modulation parameters (AM, FM, PM and PULSE)
I/Q Set IQ related parameters
During the parameter or editing process, pressing this key will clear the input of the active function area and exit
ESC/Close
the parameter input state.
Press this button to return to local control if previously controlling the instrument remotely
Trigger When the trigger type is set to Key, press this button to perform one operation
MOD ON/OFF
The main switch of various modulation modes
RF ON/OFF RF signal output switch
PRESET Press this button to revert to the default parameters. The default parameters refer to the default parameter table
UTILITY System and file related operations
HOME You can get back to the main interface quickly
MOD ON/OFF