Quick Start Guide

7 SSG5000X Signal Generator

Front panel connectors

1. LF

output

Output for the LF (low frequency) signal. This is a BNC connection. The

output can also be configured to source the modulation waveform for FM

and PM modulation types.

2. Radio frequency output terminal

RF signal output N-type connector with an impedance of 50

ohms.

Figure 1- 6 Front panel connectors

CAUTION

To avoid damage to the instrument, the RF input signal must meet the following: The DC voltage component and the

maximum continuous power of the AC (RF) signal component cannot exceed 50 V and +30 dBm respectively.