User Manual

SIGLENT
SSG5000X User Manual 119
2) Delete: Delete the carrier signal in the line where the current cursor is located
from the carrier list.
3) Assistant: Enter the assistant setting menu of carrier list, which is used to
generate a list of carriers with fixed carrier signal and equal frequency spacing.
The menu contains the following settings:
⚫ Select Waveform: Set the carrier signal applied in the carrier list by
selecting the corresponding file from the volatile memory.
⚫ Freq Space: Set the frequency spacing of adjacent carriers.
⚫ # of Carrier: Set the number of carriers, up to 100.
⚫ Done: Generate the carrier list according to the setting above, and return
to the carrier list setting interface.
⚫ Return: Press to return to the previous menu, i.e. carrier table setting
interface.
4) Load: Enter the file system directory, select and read the carrier list setting file
with the suffix of *. ml previously saved in the device.
5) Save: Enter the file system directory, input the file name, and save the current
carrier list setting, so as to read it again when necessary.
6) Return: Return to the previous menu.