User Manual

SIGLENT
SSG5000X User Manual 170
a) Press UTILITY or touch Preset Type-> Default.
b) Press PRESET or reset the system settings to perform the reset operation.
2. Create Waveform Sequence
a) Press I/Q -> ARB -> Waveform Sequence, and then click “Build” button to enter
the creating new waveform sequence interface;
b) Click the waveform segments “SINE_WAVE” and “RAMP_WAVE” in the Segment
list on the left, and you can see that these two waveform segments are added to
the waveform sequence list;
c) Modify the number of repetitions of SINE_WAVE to 2 and the number of repetitions
of RAMP_WAVE "to 3;
d) Click “Save” button and save the new sequence as “seq1”.
3. Play Waveform Sequence
a) Press I/Q -> ARB -> Select Waveform, and select to play the sequence “seq1”;
b) Set ARB State on;
At this time, the waveform sequence “seq1” is played. You can return to the main
page and click button in the IQ MOD block to view the played waveform. The
waveform currently playing is shown as below: