User Manual

USER MANUAL
ZIRC
All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be
edited, copied or circulated without prior written agreement by Sigma Designs.
© 2011 Sigma Designs, Inc.
INTRODUCTION
ZIRC is a Z-Wave
TM
enabled Remote Control. ZIRC is mainly to be used as the AV (Audio Video)
remote control for a Sigma Designs Media SetTop Box which is also supporting Z-Wave
TM
;
allowing user to remotely control the SetTop Box using RF instead of the conventional infra red
technology. Having said that, ZIRC also supports Infra-red remote feature; demonstrating the
build-in IR ready feature of Z-Wave 400 series chip set.
Besides controlling Sigma Designs Media SetTop Box, ZIRC is also compatible with any Z-Wave
TM
enabled network and devices (supporting AV Command Class) from a range of manufacturers.
Z-Wave is an interoperable two way RF mesh networking technology.
Figure 1 ZIRC Z-Wave / Infra-Red Remote Control
ZIRC is adopting an old casing of a Sigma Designs Infra-Red (IR) Remote Control to demonstrate
the possibility of converting an existing IR remote control to a Z-Wave
TM
enabled Remote
Control. ZIRC also retain the infra-red capability, in which it can be used to remote control
older series of Sigma Design Set Top boxes supporting only the conventional infra-red remote
control.
Figure 2 Sigma Design Conventional IR Remote Control & ZIRC (Z-Wave / IR Remote Control)