User manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGING CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Activating the setting mode
- 5.2 Display setup
- 5.3 Button assignment in the setting mode
- 5.4 Brief guide to device settings
- 5.5 Establishing device settings
- 5.5.1 Setting the language
- 5.5.2 Setting the date
- 5.5.3 Setting the time
- 5.5.4 Setting the gender
- 5.5.5 Setting the date of birth
- 5.5.6 Setting the weight
- 5.5.7 Setting the max. HR
- 5.5.8 Setting the training zone
- 5.5.9 Training with training zones
- 5.5.10 Setting up an individual training zone
- 5.5.11 Setting the total running time
- 5.5.12 Setting the total calories
- 5.5.13 Setting the contrast
- 5.5.14 Setting the button tones
- 5.5.15 TURNING THE ZONE ALARM ON AND OFF
- 6 TRAINING MODE
- 7 TRAINING WITH LAPS
- 8 MAINTENANCE AND CLEANING
- 9 TECHNICAL DATA
- 10 Warranty
45
US/GB
4 OVERVIEW
4.5.3 LAP VIEW
The PC 15.11 can be used for lap training. The
values for the individual laps are saved in the heart
rate monitor. You can view the values in the lap view
after and during your training.
You can only activate the lap view from the training
mode. To do this, hold down the LAP button.
In lap view mode:
Use the LAP and START/STOP buttons to navigate
and scroll through the previous laps. Press the
TOGGLE (-) and TOGGLE (+) buttons to view the
heart rate and time values for each lap.
While training, the heart rate monitor briefly shows
you a summary of the last lap for each completed lap
(briefly press the LAP button). This enables you to
directly determine whether you are close to values
you are striving to achieve (pace table, target time).