User manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGING CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Activating the setting mode
- 5.2 Display setup
- 5.3 Button assignment in the setting mode
- 5.4 Brief guide to device settings
- 5.5 Establishing device settings
- 5.5.1 Setting the language
- 5.5.2 Setting the date
- 5.5.3 Setting the time
- 5.5.4 Setting the gender
- 5.5.5 Setting the date of birth
- 5.5.6 Setting the weight
- 5.5.7 Setting the max. HR
- 5.5.8 Setting the training zone
- 5.5.9 Training with training zones
- 5.5.10 Setting up an individual training zone
- 5.5.11 Setting the total running time
- 5.5.12 Setting the total calories
- 5.5.13 Setting the contrast
- 5.5.14 Setting the button tones
- 5.5.15 TURNING THE ZONE ALARM ON AND OFF
- 6 TRAINING MODE
- 7 TRAINING WITH LAPS
- 8 MAINTENANCE AND CLEANING
- 9 TECHNICAL DATA
- 10 Warranty
47
US/GB
5 SETTING MODE
5.1 ACTIVATING THE SETTING MODE
Prerequisite: Your heart rate monitor must be in
training mode (see section 4.5 “Overview of modes
and functions”).
Hold down the TOGGLE (+) button. The display will
flash twice to indicate that the setting mode is now
active.
5.2 DISPLAY SETUP
5.3 BUTTON ASSIGNMENT IN THE SETTING MODE
1st line SET indicates that the setting mode
is active.
3rd line/ Submenu or the setting to be
4th line changed.
START/STOP
Press:
Select and confirm
LIGHT
Press:
Light on
TOGGLE
Press:
Scroll
backward
Press and
hold:
Scroll
continuously
TOGGLE
Press:
Scroll forward
Press and hold:
Scroll continuously