User manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGING CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Activating the setting mode
- 5.2 Display setup
- 5.3 Button assignment in the setting mode
- 5.4 Brief guide to device settings
- 5.5 Establishing device settings
- 5.5.1 Setting the language
- 5.5.2 Setting the date
- 5.5.3 Setting the time
- 5.5.4 Setting the gender
- 5.5.5 Setting the date of birth
- 5.5.6 Setting the weight
- 5.5.7 Setting the max. HR
- 5.5.8 Setting the training zone
- 5.5.9 Training with training zones
- 5.5.10 Setting up an individual training zone
- 5.5.11 Setting the total running time
- 5.5.12 Setting the total calories
- 5.5.13 Setting the contrast
- 5.5.14 Setting the button tones
- 5.5.15 TURNING THE ZONE ALARM ON AND OFF
- 6 TRAINING MODE
- 7 TRAINING WITH LAPS
- 8 MAINTENANCE AND CLEANING
- 9 TECHNICAL DATA
- 10 Warranty
48
www.sigmasport.com
5.4 BRIEF GUIDE TO DEVICE SETTINGS
Device settings such as language, gender, date of birth, weight,
max. HR, contrast, button tones and zone alarm are all set in the
same manner: Select the device setting, change the value and save
the modified setting.
Prerequisite: Your heart rate monitor must be in setting mode
(section 5.1).
1 Press the TOGGLE (-) or TOGGLE (+) button repeatedly until you
reach the desired device setting.
2 Press the START/STOP button. The device setting value flashes.
3 Press the TOGGLE (-) or TOGGLE (+) button repeatedly until the
desired value is displayed.
4 Press the START/STOP button. The new device setting is saved.
You can now scroll to a different device setting.
5 SETTING MODE
5.5 ESTABLISHING DEVICE SETTINGS
5.5.1 SETTING THE LANGUAGE
Follow the steps described in section 5.4 “Brief guide to device
settings”.