User manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGING CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Activating the setting mode
- 5.2 Display setup
- 5.3 Button assignment in the setting mode
- 5.4 Brief guide to device settings
- 5.5 Establishing device settings
- 5.5.1 Setting the language
- 5.5.2 Setting the date
- 5.5.3 Setting the time
- 5.5.4 Setting the gender
- 5.5.5 Setting the date of birth
- 5.5.6 Setting the weight
- 5.5.7 Setting the max. HR
- 5.5.8 Setting the training zone
- 5.5.9 Training with training zones
- 5.5.10 Setting up an individual training zone
- 5.5.11 Setting the total running time
- 5.5.12 Setting the total calories
- 5.5.13 Setting the contrast
- 5.5.14 Setting the button tones
- 5.5.15 TURNING THE ZONE ALARM ON AND OFF
- 6 TRAINING MODE
- 7 TRAINING WITH LAPS
- 8 MAINTENANCE AND CLEANING
- 9 TECHNICAL DATA
- 10 Warranty
49
US/GB
5 SETTING MODE
5.5.2 SETTING THE DATE
Prerequisite: Your heart rate monitor must be in setting mode.
Press the TOGGLE (+) button repeatedly until “Date”
appears on the display.
Press the START/STOP button. “Year” is displayed
and below it the preset year flashes.
Press the TOGGLE (-) or TOGGLE (+) button
repeatedly to set the year.
Press the START/STOP button. “Month” is displayed.
Press the TOGGLE (-) or TOGGLE (+) button
repeatedly to set the month.
Press the START/STOP button. “Day” is displayed.
Press the TOGGLE (-) or TOGGLE (+) button
repeatedly to set the day.
Press the START/STOP button. A date format is
displayed.
Select the desired date format by pressing the
TOGGLE (-) or TOGGLE (+) button.
Press the START/STOP button. The data setting is
saved.