User manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGING CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Activating the setting mode
- 5.2 Display setup
- 5.3 Button assignment in the setting mode
- 5.4 Brief guide to device settings
- 5.5 Establishing device settings
- 5.5.1 Setting the language
- 5.5.2 Setting the date
- 5.5.3 Setting the time
- 5.5.4 Setting the gender
- 5.5.5 Setting the date of birth
- 5.5.6 Setting the weight
- 5.5.7 Setting the max. HR
- 5.5.8 Setting the training zone
- 5.5.9 Training with training zones
- 5.5.10 Setting up an individual training zone
- 5.5.11 Setting the total running time
- 5.5.12 Setting the total calories
- 5.5.13 Setting the contrast
- 5.5.14 Setting the button tones
- 5.5.15 TURNING THE ZONE ALARM ON AND OFF
- 6 TRAINING MODE
- 7 TRAINING WITH LAPS
- 8 MAINTENANCE AND CLEANING
- 9 TECHNICAL DATA
- 10 Warranty
68
www.sigmasport.com
LI =
Lithium Ionen
LI
8 MAINTENANCE AND CLEANING
8.2 DISPOSAL
Electronic devices must not be disposed of with
household waste. Please give the device to
a designated disposal agency.
Batteries must not be disposed of with the household
waste (Battery Law). Please give the batteries to
a designated delivery station for their disposal.
8.1 CHANGING THE BATTERY
A CR 2032 battery (ref. no. 00342) is used in the
heart rate monitor and transmitter.
Prerequisite: You have a new battery and the battery
compartment tool.
1 Use the battery compartment tool to turn the
cover anti-clockwise until the arrow points to
OPEN.
Alternatively, you can also use a ballpoint pen.
2 Remove the cover.
3 Remove the battery.
4 Insert the new battery. The plus sign points
upward. Important: Ensure the polarity is correct!
5 Replace the cover. The arrow points to OPEN.
6 Use the battery compartment tool to turn the
cover clockwise until the arrow points to CLOSE.
7 Correct the time and date.
Important: Dispose of old batteries properly
(see section 8.2)