User manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGING CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Activating the setting mode
- 5.2 Display setup
- 5.3 Button assignment in the setting mode
- 5.4 Brief guide to device settings
- 5.5 Establishing device settings
- 5.5.1 Setting the language
- 5.5.2 Setting the date
- 5.5.3 Setting the time
- 5.5.4 Setting the gender
- 5.5.5 Setting the date of birth
- 5.5.6 Setting the weight
- 5.5.7 Setting the max. HR
- 5.5.8 Setting the training zone
- 5.5.9 Training with training zones
- 5.5.10 Setting up an individual training zone
- 5.5.11 Setting the total running time
- 5.5.12 Setting the total calories
- 5.5.13 Setting the contrast
- 5.5.14 Setting the button tones
- 5.5.15 TURNING THE ZONE ALARM ON AND OFF
- 6 TRAINING MODE
- 7 TRAINING WITH LAPS
- 8 MAINTENANCE AND CLEANING
- 9 TECHNICAL DATA
- 10 Warranty
39
US/GB
2 PACKAGING CONTENTS
Transmitter
3 SAFETY GUIDELINES
k Consult your doctor before starting training in order to avoid
health risks. This particularly applies if you suffer from any
cardiovascular diseases or have not done any sport for a long time.
k Please do not use the heart rate monitor for diving; it is only
suitable for swimming.
k Do not press any buttons while under water.
Before you can train with your new PC 15.11,
you need to activate it.
To do this, hold down the START/STOP button for
5 seconds. Your PC 15.11 will automatically change
to setting mode. Use the TOGGLE (-) and TOGGLE (+)
buttons to scroll through the basic settings. Press
the START/STOP button to confirm your entry. Set
the basic settings such as the language, date and
time. Hold down the TOGGLE (+) button to exit the
setting mode.
For further information, please see section 5 “Setting
mode”.
4.1 ACTIVATING THE HEART RATE MONITOR
4 OVERVIEW