Operation Manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGE CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Opening the setting mode
- 5.2 Display setup
- 5.3 Button assignment in setting
- 5.4 Brief guide to device settings
- 5.5 Making device settings
- 5.5.1 Setting language
- 5.5.2 Setting unit
- 5.5.3 Calibration
- 5.5.4 Correction factor
- 5.5.5 Setting date
- 5.5.6 Setting time
- 5.5.7 Setting gender
- 5.5.8 Setting birth date
- 5.5.9 Setting weight
- 5.5.10 Setting HR max.
- 5.5.11 Setting training zone
- 5.5.12 Training with training zones
- 5.5.13 Setting up the individual training zone
- 5.5.14 Setting the total distance
- 5.5.15 Setting total running time
- 5.5.16 Setting total calories
- 5.5.17 Setting contrast
- 5.5.18 Setting button tones
- 5.5.19 TURNING THE ZONE ALARM ON AND OFF
- 6 CALIBRATION & CORRECTION FACTOR
- 7 TRAINING MODE
- 7.1 Opening the training mode
- 7.2 Display setup
- 7.3 Button assignment in the training mode
- 7.4 Functions during the training
- 7.5 Radio link with the R3 transmitter
- 7.6 Starting the training
- 7.7 Interrupting the training
- 7.8 Exiting the training
- 7.9 Training values after the training
- 7.10 Resetting the training values
- 8 MAINTENANCE AND CLEANING
- 9 TECHNICAL DATA
214
www.sigmasport.com
4 OVERVIEW
You will train in this mode.
*Note: Total values are
displayed only if the
stopwatch is not running.
PULSE
k Average heart rate
k Maximum heart rate
k Calories
k Total Kcal*
SET
k Distance (in km or mi)
k Speed
(in km/h or min/km)
START/STOP
k Stopwatch
LIGHT
SPEED
k Running time
k Average speed
k Maximum speed
k Clock
k Total distance*
k Total running time*
4.4.1 SLEEP MODE
4.4.2 TRAINING MODE
In sleep mode, only the time and date are displayed. Switch from
sleep mode to training mode by pressing and holding any button
for 3 seconds.