Operation Manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGE CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Opening the setting mode
- 5.2 Display setup
- 5.3 Button assignment in setting
- 5.4 Brief guide to device settings
- 5.5 Making device settings
- 5.5.1 Setting language
- 5.5.2 Setting unit
- 5.5.3 Calibration
- 5.5.4 Correction factor
- 5.5.5 Setting date
- 5.5.6 Setting time
- 5.5.7 Setting gender
- 5.5.8 Setting birth date
- 5.5.9 Setting weight
- 5.5.10 Setting HR max.
- 5.5.11 Setting training zone
- 5.5.12 Training with training zones
- 5.5.13 Setting up the individual training zone
- 5.5.14 Setting the total distance
- 5.5.15 Setting total running time
- 5.5.16 Setting total calories
- 5.5.17 Setting contrast
- 5.5.18 Setting button tones
- 5.5.19 TURNING THE ZONE ALARM ON AND OFF
- 6 CALIBRATION & CORRECTION FACTOR
- 7 TRAINING MODE
- 7.1 Opening the training mode
- 7.2 Display setup
- 7.3 Button assignment in the training mode
- 7.4 Functions during the training
- 7.5 Radio link with the R3 transmitter
- 7.6 Starting the training
- 7.7 Interrupting the training
- 7.8 Exiting the training
- 7.9 Training values after the training
- 7.10 Resetting the training values
- 8 MAINTENANCE AND CLEANING
- 9 TECHNICAL DATA
220
www.sigmasport.com
5.5.7 SETTING GENDER
Follow steps 1-4 as described in section 5.4 “Brief guide to device settings”
This device setting is included in the calculation of the maximum heart
rate and the calories. So, set the value correctly.
5 SETTING MODE
5.5.8 SETTING BIRTH DATE
5.5.9 SETTING WEIGHT
5.5.10 SETTING HR MAX.
Follow steps 1-4 as described in section 5.4 “Brief guide to device settings”
This device setting is included in the calculation of the maximum heart
rate and the calories. So, set the value correctly.
Follow steps 1-4 as described in section 5.4 “Brief guide to device settings”
This device setting is included in the calculation of the maximum heart
rate and the calories. So, set the value correctly.
The maximum heart rate (HR max.) is determined by the running
computer from gender, weight and birth date.
Attention: You can also change the training zones with this value.
Change the HR max. value only when it has been determined by a safe
test, such as performance diagnostics, HR max. test, etc.
Follow steps 1-4 as described in section 5.4 “Brief guide to device
settings”