Operation Manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGE CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Opening the setting mode
- 5.2 Display setup
- 5.3 Button assignment in setting
- 5.4 Brief guide to device settings
- 5.5 Making device settings
- 5.5.1 Setting language
- 5.5.2 Setting unit
- 5.5.3 Calibration
- 5.5.4 Correction factor
- 5.5.5 Setting date
- 5.5.6 Setting time
- 5.5.7 Setting gender
- 5.5.8 Setting birth date
- 5.5.9 Setting weight
- 5.5.10 Setting HR max.
- 5.5.11 Setting training zone
- 5.5.12 Training with training zones
- 5.5.13 Setting up the individual training zone
- 5.5.14 Setting the total distance
- 5.5.15 Setting total running time
- 5.5.16 Setting total calories
- 5.5.17 Setting contrast
- 5.5.18 Setting button tones
- 5.5.19 TURNING THE ZONE ALARM ON AND OFF
- 6 CALIBRATION & CORRECTION FACTOR
- 7 TRAINING MODE
- 7.1 Opening the training mode
- 7.2 Display setup
- 7.3 Button assignment in the training mode
- 7.4 Functions during the training
- 7.5 Radio link with the R3 transmitter
- 7.6 Starting the training
- 7.7 Interrupting the training
- 7.8 Exiting the training
- 7.9 Training values after the training
- 7.10 Resetting the training values
- 8 MAINTENANCE AND CLEANING
- 9 TECHNICAL DATA
230
www.sigmasport.com
7.1 OPENING THE TRAINING MODE
To go into training mode:
k From sleep mode
Press and hold any button for 3 seconds.
k From setting mode
Press and hold SET button for 3 seconds.
7 TRAINING MODE
7.2 DISPLAY SETUP
k Arrow next to pulse display
In the example, the heart rate is below the selected training zone
and should be increased. If the heart rate is too high, the arrow
points down.
k Arrow next to speed
In the example, the speed is below the current training average.
k Stopwatch icon
The training has started, the stopwatch is running.
k Current heart rate
k Speed or distance
k Shows functions of SPEED (+)
or PULSE (-) - ex. the Run Time
k SPEED (+) button:
Distance or time values
k PULSE (-) button:
Heart rate or calories burned