Operation Manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGE CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Opening the setting mode
- 5.2 Display setup
- 5.3 Button assignment in setting
- 5.4 Brief guide to device settings
- 5.5 Making device settings
- 5.5.1 Setting language
- 5.5.2 Setting unit
- 5.5.3 Calibration
- 5.5.4 Correction factor
- 5.5.5 Setting date
- 5.5.6 Setting time
- 5.5.7 Setting gender
- 5.5.8 Setting birth date
- 5.5.9 Setting weight
- 5.5.10 Setting HR max.
- 5.5.11 Setting training zone
- 5.5.12 Training with training zones
- 5.5.13 Setting up the individual training zone
- 5.5.14 Setting the total distance
- 5.5.15 Setting total running time
- 5.5.16 Setting total calories
- 5.5.17 Setting contrast
- 5.5.18 Setting button tones
- 5.5.19 TURNING THE ZONE ALARM ON AND OFF
- 6 CALIBRATION & CORRECTION FACTOR
- 7 TRAINING MODE
- 7.1 Opening the training mode
- 7.2 Display setup
- 7.3 Button assignment in the training mode
- 7.4 Functions during the training
- 7.5 Radio link with the R3 transmitter
- 7.6 Starting the training
- 7.7 Interrupting the training
- 7.8 Exiting the training
- 7.9 Training values after the training
- 7.10 Resetting the training values
- 8 MAINTENANCE AND CLEANING
- 9 TECHNICAL DATA
232
www.sigmasport.com
7.4 FUNCTIONS DURING THE TRAINING
The Running Computer measures many different training statistics, but
it cannot display them all at once. You can view any function with just a
press of a button.
7 TRAINING MODE
7.5 RADIO LINK WITH THE R3 TRANSMITTER
The RC 1209 receives the heart rate, speed and distance from the
R3 transmitter. This is a coded digital transmission. The coding ensures
that other signals from other transmitters are ignored and only the
signals from your chest are received.
With the SET button you can switch between speed
and distance in the middle line.
With the PULSE (-) or SPEED (+) button you can
choose the function you want to see in the lower
display area.
Note: Calories, distance, average and maximum values require a time
component and therefore can only be calculated when the stopwatch
is running.