Operation Manual

Page 26
Memory capacity for track data
Load track
www.sigmasport.com ROX
®
10.0
ROX
®
10.0
6 Load track
Load track
Driven tracks
Stored tracks
This function enables you to select, start, display, and delete driven or stored
tracks.
Note
Information on the memory capacity of the tracks and points can be found in
section ‘6.1.1 Track data memory’.
6.1 Memory capacity for track data
The memory for the training sessions can store up to 100 training files. The
maximum storage period also depends on the log interval selected.
The log times in hours per log interval can be seen in the table:
Log interval Log time in hours
1 sec 8:12:00
2 sec 16:25:00
5 sec 41:04:00
10 sec 82:08:00
20 sec 164:16:00
30 sec 246:24:00
The log interval can be set at the menu path “Settings/Device” (see section
‘10.2 Device’).
6.1.1 Track data memory
The track memory can store up to 50 tracks with a total of up to approx. 42,000
track points.
A maximum of 384 waypoints can be stored. You can also mark special points of
interest (POI) located near the route as waypoints.