Operation Manual

Page 50
Troubleshooting
Important information, troubleshooting, and FAQ
www.sigmasport.com ROX
®
10.0
ROX
®
10.0
11.2 Troubleshooting
No speed displayed via the ANT+ speed transmitter
− Do you have both the ANT+ speed transmitter and the magnet properly
installed?
− Has the ANT+ speed transmitter been paired with the ROX 10.0 GPS?
(See section ‘10.3 Bike 1–3 & totals’)
− Have you checked the distance between the magnet and the ANT+ speed
transmitter (max. 12 mm or 1/2 inch)? If the distance between the magnet
and transmitter is correct and the transmitter is properly paired, the LED
light on the transmitter will flash with the first 10 wheel rotations.
− Have you checked whether the magnet is magnetized?
− Have you checked the ANT+ speed transmitter”s battery status? To do so,
press the button on the transmitter and check if the LED illuminates.
No speed displayed via the GPS signal
− You can switch off the GPS function under the menu path “Settings/GPS
Settings”. Is it switched on?
− Are you outdoors?
− Does your ROX 10.0 GPS have satellite connection? (See section ‘8.2 GPS
signal’). Please note that it can initially take approx. 1 minute for a GPS signal
to be received.
No cadence displayed
− Do you have both the ANT+ cadence transmitter and the magnet properly
installed?
− Has the ANT+ cadence transmitter been paired with the ROX 10.0 GPS?
(See section ‘10.3 Bike 1–3 & totals’)
− Have you checked the distance between the magnet and the ANT+ cadence
transmitter (max. 12 mm or 1/2 inch)? If the distance between the magnet
and transmitter is correct and the transmitter is properly paired, the LED
light on the transmitter will flash with the first 10 pedal rotations..
− Have you checked whether the magnet is magnetized?
− Have you checked the ANT+ cadence transmitter”s battery status?
No heart rate displayed
− Are the electrodes moist enough?
− Is the ANT+ heart rate transmitter correctly positioned against your body?
− Has the ANT+ heart rate transmitter been paired with the ROX 10.0 GPS?
− Have you checked the ANT+ heart rate transmitter”s battery status?