Operation Manual

30 31

Open the setting using the MENU button.

Change the setting using the BIKE button or the ALTI button.

Confirm your selection using the MENU button.

Now you can call up the next device setting using the BIKE button or the ALTI button.

If you do not want to change any other settings,

press the BIKE button or the ALTI button until "BACK" appears on the display.

Then briefly press the MENU button.

The Settings menu closes.

ALTERNATIVELY you can also press and hold the MENU button.

The Settings menu closes.

The BC 23.16 STS returns to function mode.

ALTERNATIVELY you can also press and hold the BIKE button.

This takes you one level higher in the Settings menu.

CADENCE ON/OFF

Cadence tracking is activated by default.

If you do not want to use cadence tracking, you can deactivate

cadence tracking here.

This is the process:

Open the main menu using the MENU button.

Scroll to the settings using the BIKE button or the ALTI button.

Open the settings using the MENU button.

Open the device settings using the MENU button.

Scroll to the setting for Cadence using the BIKE button

or the ALTI button.

POWER SAVE

The Power Save setting lets you reduce battery consumption in

stand-by mode and sleep mode.

Instead of the normal stand-by display or the sleep display, only

the reduced sleep display is shown after another 5 minutes.

Normal sleep display:

Sleep display with sleep screen and MyName:

You can find information about MyName and the various

sleep screens on the SIGMA website: www.sigmasport.com