Operation Manual

34 35

USING NFC TO READ DATA/MODIFY SETTINGS

To read out trip data and logging data, place your Android smartphone against

the BC 23.16 STS.

– NFC must be activated on the smartphone.

– The SIGMA LINK app must be installed on the smartphone.

– NFC must be set to ON on the BC 23.16 STS. (See the previous chapter)

The data and settings are transferred from the BC 23.16 STS to the app on the smartphone

in a few seconds.

From the app on the phone, the data can be synchronised with the SIGMA CLOUD.

www.sigma-data-cloud.com

Data can be imported and analysed in the SIGMA DATA CENTER from the SIGMA CLOUD.

You can also use the app to export all of the BC 23.16 STS settings and conveniently edit

them on your smartphone.

Then the modified settings can be transferred back to the BC 23.16 STS using NFC.

This requires placing the smartphone against BC 23.16 STS

again.

If communication is successful, the BC 23.16 STS shows this

on the display. The app also displays an OK message.

If there is a problem with NFC, this is also indicated on the

BC 23.16 STS display and a corresponding message appears

in the app.

The messages must be confirmed by pressing any button.

This is the process:

Open the main menu using the MENU button.

Scroll to the settings using the BIKE button or the ALTI button.

Open the settings using the MENU button.

Open the device settings using the MENU button.

Scroll to the setting for NFC using the BIKE button

or the ALTI button.

Open the setting using the MENU button.

Change the setting using the BIKE button or the ALTI button.

Confirm your selection using the MENU button.

Now you can call up the next device setting using the BIKE button or the ALTI button.

If you do not want to change any other settings,

press the BIKE button or the ALTI button until "BACK" appears on the display.

Then briefly press the MENU button.

The Settings menu closes.

ALTERNATIVELY you can also press and hold the MENU button.

The Settings menu closes.

The BC 23.16 STS returns to function mode.

ALTERNATIVELY you can also press and hold the BIKE button.

This takes you one level higher in the Settings menu.