Operation Manual

38 39
The first two digits flash.
Change the digits using the BIKE button or the ALTI button.
Confirm using the MENU button.
Now the 3rd digit flashes.
Change the digit using the BIKE button or the ALTI button.
Confirm using the MENU button.
Now the 4th digit flashes.
Change the digit using the BIKE button or the ALTI button.
Confirm using the MENU button.
Your wheel size setting for bike 1 is complete.
Setting the wheel size for bike 2 is handled the same way as described above.
You can use two different bikes. The values for BIKE 1 and for BIKE 2 are set separately and
the values of trips are stored separately.
If you do not want to change any other settings,
press the BIKE button or the ALTI button until "BACK" appears on the display.
Then briefly press the MENU button.
The Settings menu closes.
ALTERNATIVELY you can also press and hold the MENU button.
The Settings menu closes.
The BC 23.16 STS returns to function mode.
ALTERNATIVELY you can also press and hold the BIKE button.
This takes you one level higher in the Settings menu.
BIKE TYPE
The bike type has to be defined for the power calculation (watts).
There are three bike types to choose from in the BC 23.16 STS:
– Race drop
– Race hood
– Mountain bike (MTB)
The selected bike type defines the air resistance value used in the power calculation.
This is the process:
Press and hold the MENU button to open the Settings menu.
Using the BIKE button or the ALTI button, switch to Settings.
Open the setting using the MENU button.
In the settings, scroll to the BIKE Settings using the
BIKE button or the ALTI button.
Open the bike settings using the MENU button.
On the display, you will see the setting for the wheel size of
bike 1.
Open the setting using the MENU button.
Change the wheel size setting using the BIKE button or the
ALTI button.
Confirm the setting with MENU button.
You can also set the wheel size in millimeters manually.
This requires scrolling through the setting menu for the wheel
size using the BIKE or the ALTI button until "manual" appears
on the display.
Open the setting using the MENU button.
EN